| TOP | STORE | DSSF3 | MMLIB | Support | Contact Us |
|
|
About
this manual
Introduction
of RA
Operation
Guide
Impulse
response
Running
ACF
Reference
Manual
Appendix
About this manual
How to use the program in the actual measurement is explained in the Operation Guide. Measurement reports by use of DSSF3 are given in the following application note. It covers a wide range of application.
How to start RA
RA has easy to use and powerful measurement capabilities. You can start the measurement by just clicking the "Start" button on the measurement windows. Complicated settings can be ignored at first, because these are set by the program automatically. Signal generator, oscilloscope, FFT analyzer would tell you many things about sound. As a next step, try to release the automatic settings and adjust parameters manually. Resultant waveforms may change. You will understand how the parameters affect the measurement result. If you don't understand, follow the instructions in the operation guides and the measurement reports. You can learn how to use RA step by step.
NOTE: When you find some difference between the program and the manual, please understand that the manual will be updated later.
| Y Store managed by Harrison Investment Inc. and Y Works. |
|
About
this manual
Introduction
of RA
Operation
Guide
Impulse
response
Running
ACF
Reference
Manual
Appendix |
| TOP | STORE | DSSF3 | MMLIB | Support | Contact Us |
If you have questions or comments about this
page,
feel free to contact us by email ymec@ymec.com
or by online
inquiry form.